Rolling stock › WithdrawnData updated

District Railway electric locomotives

Ten locomotives, Nos 1A to 10A, the Underground group's first steel-bodied vehicles: bodies by Metropolitan Amalgamated, ordered in September 1904 and delivered from June 1905, and four 200 hp British Thomson-Houston motors each (800 hp). Single-ended and worked in pairs back to back, from 4 December 1905 they took the London & North Western's trains from Broad Street between Earl's Court and Mansion House, until the end of 1908, and in 1909-10 worked Circle trains, one locomotive to four trailers. From 1 June 1910 they hauled the London, Tilbury & Southend through trains from Ealing Broadway as far as Barking. Three were stripped for their equipment in 1910; the rest, renumbered L1 to L7 in 1932, were withdrawn on 1 October 1939 and scrapped within six weeks, two having gone in 1938.

District Railway electric locomotives, indicative only

District Railway electric locomotives · indicative drawing GB Trains · gbtrains.uk/stock/district-elocos/ · CC BY 4.0

indicative drawing: some dimensions are estimated, from photographs and published figures. The lengths, the bogies, the wheels and the height from the scale drawing in the London Underground Railway Society's article (from the 1904 drawings); the side's layout from the Street Railway Journal's 1906 photograph of Nos 1A and 2A, rectified. The heights of the windows, doors and eaves are not published, so they are estimates and this is a schematic. Drawn at 10 px per metre. Download SVG · Use this drawing

You’re welcome to use this drawing

Free to use, change and share, in print or online, under CC BY 4.0. Please credit it:

Drawing: GB Trains, gbtrains.uk, CC BY 4.0

Online, link the words to this page. The downloaded file already carries the credit; please leave it on. What the licence covers

Used it somewhere? Tell us where → (opens in a new tab)

Compare with the Metropolitan-Vickers electric locomotives and the Metropolitan Railway 'camel-back' and box-cab locomotives →

Type
Electric locomotive (Bo-Bo, 800 hp), worked in pairs
Builder
Metropolitan Amalgamated (bodies); BTH (electrical)
Built
1905
In service
1905–1939
Lines
District
Formation
Two locomotives coupled back to back, as drawn: the District worked them in pairs, 'a locomotive in two units'
Bogies
the District's A Type cast-steel motor bogies (Hedley design), with their shoebeams
Car height
12 ft 3¼ in (3.74 m)
Car width
8 ft 8 in (2.642 m)
Profile
sub-surface
Walk-through
No
Air-conditioned
No

Car types

CodeCarLengthDoors per side
LDistrict locomotive (one unit of a pair)25 ft 10½ in7.887 m

Sources

How we source figures →  ·  Spotted a mistake? Tell us → (opens in a new tab)

Show the 8 sources from London Underground Railway Society, McGraw Publishing, Wikipedia and 1 more
unverified

Know a source for one of these? Send it to us → (opens in a new tab)

Top